Welcome to the SolidWorks Website. SolidWorks provides access to this
Website to the public as a convenience, but subject to the following terms
of use. By accessing, viewing, using or downloading materials from this
Website, you agree to be bound by these terms and conditions, if you do
not agree with these terms of use do not use this website.
Copyright
Information. Copyright 1997-2003 SolidWorks Corporation. All rights
reserved.
Use of Materials on SolidWorks
Website. Unless otherwise specified, you may view and download the
materials at this Website only for your personal, informational, and noncommercial
purposes, provided that you retain all copyright and other proprietary
notices contained in the original materials on any copies of the materials.
You may not modify the materials at this Website in any way or reproduce
or publicly display, perform, post, transmit, distribute or otherwise
use them for any public or commercial purpose.
Use of Downloadable Software.
Any software that may be downloaded from this Website is licensed subject
to the terms of the applicable license agreement. Except for rights granted
pursuant to such license agreement, SolidWorks and its licensors reserve
all intellectual property rights, title and interest in such software.
Partner
and other Third Party Descriptions. This website contains information
concerning various third parties (often referred to as "partners")
who offer products or services compatible with SolidWorks products. This
information is provided for your convenience only. SolidWorks is not responsible
for and does not warrant any third party product or service or the accuracy
of any description.
Trademark Information.
SolidWorks, eDrawings, DWGeditor, PDMWorks , Cosmic Blobs, 3D PartStream.NET, and 3D ContentCentral are registered trademarks of SolidWorks Corporation. COSMOSXpress, PhotoWorks, DWGgateway, XchangeWorks. and Feature Palette are trademarks, and FeatureManager is a jointly owned registered trademark of SolidWorks Corporation. COSMOS COSMOSM, and COSMOSWorks are registered trademarks and COSMOSMotion, COSMOSFloWorks, and COSMOSDesignStar are trademarks of Structural Research and Analysis Corporation. FeatureWorks is a registered trademark of Geometric Software Solutions Co. Limited. Other company and product names are trademarks or registered trademarks of their respective owners. For a complete list of SolidWorks trademarks, and more information about these trademarks, and proper trademark use, please view the document SolidWorks
Trademarks and Usage.
Links
to Other Websites. SolidWorks provides certain links to other websites
as a convenience to you. SolidWorks does not monitor nor control the content
of any other website and assumes no responsibility or liability of any
kind for any material or communications available at such websites. SolidWorks
is not responsible for the content of any site that may be linked to SolidWorks
Website.
Changes
to these Terms of Use. SolidWorks may at any time revise these
Terms of Use by updating this posting. You are bound by any such revisions.
Disclaimer
of Warranty. Information on this Website may contain factual inaccuracies
or typographical errors or be incomplete or out of date. Information may
be changed or updated without notice. SolidWorks may make changes and/or
improvements in the products and/or programs described in this Website
at any time without notice. EXCEPT AS OTHERWISE EXPRESSLY PROVIDED
IN A WRITTEN AGREEMENT BETWEEN YOU AND SOLIDWORKS, ALL MATERIALS PROVIDED
AT THIS WEBSITE ARE PROVIDED "AS IS" AND WITHOUT ANY WARRANTIES
OF ANY KIND, INCLUDING WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, AND NONINFRINGEMENT.
IN NO EVENT SHALL SOLIDWORKS
BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTIAL, SPECIAL OR CONSEQUENTIAL
DAMAGES OR DAMAGES FROM BUSINESS INTERRUPTION OR LOSS OF PROFITS, REVENUE,
DATA OR USE, INCURRED BY YOU OR ANY THIRD PARTY, WHETHER BASED ON WARRANTY
OR IN CONTRACT, TORT, OR OTHER LEGAL THEORY, AND WHETHER OR NOT ADVISED
OF THE POSSIBILITIES OF SUCH DAMAGES, ARISING FROM YOUR ACCESS TO, OR
USE OF, THIS WEBSITE OR ANY OTHER HYPERLINKED WEBSITE, EVEN IF SOLIDWORKS
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
User Submissions/
Access to Newsgroups. With the exception of personally identifiable
information discussed in the SolidWorks Privacy
Policy, any material, information, emails or other communication you
transmit or post to SolidWorks or to this Website ("Communications")
will be considered non-confidential and non-proprietary. SolidWorks will
have no obligations with respect to such Communications, other than as
provided in SolidWorks' Privacy Policy.
SolidWorks and its designees will be free to copy, disclose, distribute,
incorporate and otherwise use the Communications and all data, images,
sounds, tests and other things embodied therein for any and all commercial
and non-commercial purposes.
You are prohibited from posting or
transmitting to or from this Website any unlawful, threatening, libelous,
defamatory, obscene, pornographic, confidential or other material that
would violate any law, including without limitation, copyright, trademark,
trade secret, or any rights of third parties.
SolidWorks may, but is not obligated
to, monitor or review any areas on this Website where users transmit or
post Communications. SolidWorks will have no liability for the content
of any Communications, whether or not arising under the laws of copyright,
trademark, trade secret, libel, privacy, obscenity or otherwise.
Export
control. By downloading or accessing software or technical data,
you are agreeing not to import, export or re-export, either directly or
indirectly (including transmission and shipment) except in accordance
with all applicable laws, and you are accepting responsibility to determine
what is necessary to assure such compliance. In particular, but without
limitation, you agree not to export, re-export or provide the software
or technical data: (i) to, or to a national or resident of Cuba, Iraq,
Iran, Sudan, Libya, Syria, North Korea, or to any other country embargoed
or restricted by the U.S. (This list of countries is current as of March
2003 but is subject to change), (ii) to anyone on the U.S. Commerce Department's
Table of Denial Orders or the U.S. Department of Treasury's Specially
Designated Nationals Lists, or (iii) to any person or entity who has been
prohibited from participating in U.S. export transactions by any agency
of the U.S. Government. You are also agreeing not to download, transfer,
export or re-export SolidWorks products, technology or software to your
customers or any intermediate entity in the chain of supply if our products
will be used in the design, development, production, stockpiling or use
of missiles, chemical or biological weapons or for nuclear end uses, without
obtaining prior authorization from the U.S. Government.
Applicable
Laws. This Website is controlled by SolidWorks from its offices
in Concord, Massachusetts. SolidWorks makes no representation that materials
at this Website are appropriate or available for use outside of the United
States and access to them from territories where their contents are illegal
is prohibited. Those who access this site from other jurisdictions do
so on their own initiative and are responsible for compliance with applicable
local laws. Any claim relating to the materials on this Website shall
be governed by the substantive laws of the Commonwealth of Massachusetts,
excluding its principals as to conflicts of law or the United Nations
Convention on contracts for the International Sale of Goods.
Any dispute arising out of or in connection
with the use or access or otherwise related to this website shall be finally
settled by a competent court of Massachusetts.
See
also Privacy Policy.
