SolidWorks Customer BUB Racing Recaptures Motorcycle World Land Speed Record
367.382 mph in a Two-Wheeled Missile
CONCORD, Mass., USA, Nov. 30, 2009 – Dassault Systèmes SolidWorks Corp. (DS SolidWorks) customer Denis Manning and his BUB Enterprises racing team have set the motorcycle world land speed record, recapturing a title Manning has now held three times since 1970.
The missile-shaped motorcycle, designed in SolidWorks® CAD software and optimized in SolidWorks Simulation software, broke the previous record by a margin of more than
8 mph. Piloted by Chris Carr, the BUB Racing Streamliner officially clocked in at 367.382 mph on Thursday, Sept. 24, 2009 over a measured mile at the hallowed Bonneville Salt Flats in Utah (see video: http://is.gd/3Qw8d).
“The last thing we did before the run was make an eighth-inch change to the aerodynamics, and that made all the difference,” said Manning, CEO of BUB Enterprises. “The data was telling us the nose was trying to dive, so we raised it up and it worked. Our new alcohol-fueled V4 engine put the record within reach.”
Manning set his first motorcycle land speed record in 1970, and his team has since traded the record with opponents. As his Streamliner designs grew increasingly sophisticated, the BUB team realized it needed to use advanced mechanical design, simulation, and manufacturing technologies to stay ahead of its competitors.
“Until recently, going really fast basically required money,” Manning explains. “Breaking the record used to be pretty much, ‘Gentlemen, start your checkbook.’ Now it’s, ‘Gentlemen, start your gray matter.’ The designs that have a legitimate shot at speeds over 350 mph require a whole new level of engineering know-how and technology like SolidWorks helps deliver. CAD is our virtual prototyper, and Simulation is our crystal ball.”
BUB selected SolidWorks because it helps the team easily transform ideas into reality and successfully confront its steepest technical challenges. “SolidWorks software helped lower the bar for us to accomplish this record,” said Manning. “Because of the design and simulation tools, we no longer had to build and smash the bike a few times, or blow an engine, before we were ready for a record attempt. We knew the numbers, we knew how to do this, and we set the record again.”
BUB also uses SolidWorks, including its Flow Simulation software, to design and analyze its BUB commercial exhaust systems. BUB Enterprises relies on authorized SolidWorks reseller GoEngineer for ongoing software training, implementation, and support.
About Dassault Systèmes SolidWorks Corp.
Dassault Systèmes SolidWorks Corp., a Dassault Systèmes S.A. subsidiary, is a world leader in 3D solutions that help millions of engineers and designers succeed through innovation. Our products deliver an intuitive experience in product design, simulation, publishing, data management, and environmental impact assessment. For the latest news, information, or an online demonstration, visit our Web site (www.solidworks.com) or call 1-800-693-9000 (outside of North America, call +1-978-371-5000).
About Dassault Systèmes
As a world leader in 3D and Product Lifecycle Management (PLM) solutions, Dassault Systèmes brings value to more than 100,000 customers in 80 countries. A pioneer in the 3D software market since 1981, Dassault Systèmes develops and markets PLM application software and services that support industrial processes and provide a 3D vision of the entire lifecycle of products from conception to maintenance to recycling. The Dassault Systèmes portfolio consists of CATIA for designing the virtual product – SolidWorks for 3D mechanical design – DELMIA for virtual production – SIMULIA for virtual testing – ENOVIA for global collaborative lifecycle management, and 3DVIA for online 3D lifelike experiences. Dassault Systèmes’ shares are listed on Euronext Paris (#13065, DSY.PA). For more information, visit http://www.3ds.com/.
SolidWorks is a registered trademark of Dassault Systèmes SolidWorks Corporation in the US and other countries. 3D VIA is a registered trademark and 3DVIA Composer is a trademark of Dassault Systèmes in the US and other countries. Other brand and product names are trademarks of their respective owners. © 2010 Dassault Systèmes SolidWorks Corp.