California State University, Chico uses SolidWorks software to design award-winning wheelchair

New design increases user leverage and mobility, and keeps hands clean

CONCORD, Mass., Sept. 14, 2005 ? California State University, Chico manufacturing technology students used SolidWorks® Education Edition 3D mechanical design software to design a next-generation wheelchair that recently won the grand prize at the WESTEC Expo, the largest annual machinery show in North America.

The wheelchair's unique design uses pump-action levers for propulsion, three speeds for varying terrain, and disk brakes for sure stopping. The levers let wheelchair users more easily apply power to the chair, even if their grip is compromised by disability, and keep their hands off dirty wheels. Unlike previous lever-based prototypes, the Chico students' wheelchair levers are inboard of the wheels for better leverage and navigation through doorways.

?SolidWorks software's ease of use and efficiency enabled students to create more than 30 custom components for the chair on their own time ? a daunting task I wasn't sure they could achieve,? said Dirk Vanderloop, coordinator of CSU Chico's manufacturing technology program. ?SolidWorks is also the software our advisory board of regional industry leaders urged us to standardize on, and the software our graduates most frequently see in their careers. SolidWorks is easy to teach, easy to learn, more intuitive, and interfaces more easily with CAM than all other software we looked at. It became an industry standard because it's the tool that makes the most engineering and economic sense. Our students and faculty couldn't be happier with it.?

More than 400 students in the school's mechanical engineering, mechatronic engineering, and manufacturing technology programs use SolidWorks Education Edition software, which includes COSMOS® design analysis software. SolidWorks software supplanted AutoCAD® software two years ago when it was time for CSU Chico to evolve to 3D design.

Another win at WESTEC

The Expo and Manufacturing Challenge are sponsored by the Society of Manufacturing Engineers (SME), which has more than 400 professional and school-based chapters worldwide. CSU Chico's manufacturing technology program has an SME chapter and 85 student majors. Students presented SolidWorks-based wheelchair designs from a laptop to demonstrate to judges every step of the wheelchair conception, design, refinement, and construction ? an important step to prove students did all the work.

The Manufacturing Challenge is held on opening day of WESTEC. CSU Chico won grand prizes at WESTEC in 1991, 1992, and 2003, and first places in 1987, 1993, 1995, and 1998. In the April 2005 edition, CSU Chico bested a field of collegiate competitors that included Cal Poly San Luis Obispo, San Diego State, Washington State, Oregon Institute of Technology, and Brigham Young University .

CSU Chico students worked with construction management student and wheelchair user Amy Jones in designing the wheelchair. Jones tested the modifications and provided feedback to the engineering students. The challenge was to create an alternative to the fatiguing hand-and-arm wheel-turning method of propelling traditional chairs. The design was adapted from one created by Bryan Hilton, an industrial technology student in the 1980s who died from a brain tumor shortly after graduating. CSU Chico is now investigating patent possibilities for the chair.

?CSU Chico students deliver consistently impressive performances at WESTEC and in their day-to-day work, and SolidWorks Corporation is proud its software played a small part in such an innovative and award-winning design,? said Rosanne Kramer, director of worldwide education markets for SolidWorks Corporation. ?This design has far-reaching implications for wheelchair users, and for the future of wheelchair design. We look forward to seeing how this product evolves and what else these gifted students can accomplish with their CSU educations and SolidWorks experience.?

 

CSU Chico relies on authorized SolidWorks reseller GoEngineer for ongoing software training, implementation, and support.

About California State University , Chico
California State University, Chico, established in 1887, is internationally recognized as a pioneer in distance education. U.S. News & World Report rated Chico among the best Western public regional universities in their 2005 annual guide, America's Best Colleges. CSU Chico offers more than 100 undergraduate majors and options and maintains the highest graduation rate in the California State University system. For more information, please visit www.csuchico.edu .

About GoEngineer

GoEngineer is a leading product design solutions reseller with full-service training and support facilities located throughout Utah , Idaho , and Southern California, with new locations in San Diego and San Dimas . GoEngineer supports more than 4,000 SolidWorks software licenses throughout California , Hawaii , Utah , and Idaho in the education sector alone. GoEngineer provides extensive customer services for engineers including; eleven continuous hours of access to a quick response toll free hotline, Web support, software utilities, and local senior engineers fully certified in delivering comprehensive SolidWorks-centric solutions for mechanical engineers and manufacturers. For the latest news from GoEngineer, visit the company Web site at www.goengineer.com or contact a representative at 800.688.3234.

# # #

About SolidWorks

Powered by the Dassault Systèmes 3DExperience Platform, SolidWorks 3D applications help millions of engineers and designers succeed through innovation. SolidWorks delivers an intuitive experience in product design, simulation, publishing, data management, and environmental impact assessment. For the latest news, information, or an online demonstration, visit our Web site (www.3ds.com/solidworks) or call 1-800-693-9000 begin_of_the_skype_highlighting            1-800-693-9000       (outside of North America, call +1-781-810-5011).

 

About Dassault Systèmes

Dassault Systèmes, the 3DEXPERIENCE Company, provides business and people with virtual universes to imagine sustainable innovations.  Its world-leading solutions transform the way products are designed, produced, and supported.  Dassault Systèmes’ collaborative solutions foster social innovation, expanding possibilities for the virtual world to improve the real world.  The group brings value to over 150,000 customers of all sizes, in all industries, in more than 140 countries.  For more information, visit www.3ds.com.

 

CATIA, SOLIDWORKS, SIMULIA, DELMIA, ENOVIA, GEOVIA, EXALEAD, NETVIBES,  3DSWYM and 3DVIA are registered trademarks of Dassault Systèmes or its subsidiaries in the US and/or other countries.

 

SolidWorks is a registered trademark of Dassault Systèmes SolidWorks Corporation in the US and other countries. 3DVIA is a registered trademark and 3DVIA Composer is a trademark of Dassault Systèmes in the US and other countries. Other brand and product names are trademarks of their respective owners. © 2012 Dassault Systèmes SolidWorks Corp.