SolidWorks Plastics Matrix
SolidWorks Plastics Professional |
SolidWorks Plastics Premium |
|---|
| CAD Integration | |||
| SolidWorks Native File Support | |||
| Associative with SolidWorks | |||
| SolidWorks-embedded | |||
| Plastics Material Database | |||
| 4000+ Commercial Plastics | |||
| Customizable | |||
| Meshing | |||
| Automatic | |||
| Boundary Mesh (shell) | |||
| Solid 3D Mesh | |||
| Global Refinement | |||
| Local Refinement | |||
| Simulation Capabilities | |||
| Filling Phase (1st stage injection) | |||
| Packing Phase (2nd stage injection) | |||
| Automatic Gate Location(s) | |||
| Instantaneous Filling Pattern Visualizer | |||
| Runner Balancing | |||
| Sink Mark Analysis | |||
| Mold Geometry Support | |||
| Sprues and Runners | |||
| Hot & Cold Runners | |||
| Runner Design Wizard | |||
| Multi-Cavity Molds | |||
| Family Molds | |||
| Advanced Analysis | |||
| Co-Injection | |||
| Multi-Shot | |||
| Insert Overmolding | |||
| Gas-Assist | |||
| Fiber Analysis | |||
| Reaction Injection Molding (RIM) | |||
| Birefringence | |||
| Valve Gate (sequential injection) | |||
| Results | |||
| Fill Time | |||
| Pressure at End of Fill | |||
| Temperature at End of Fill | |||
| Flow Front Temperature | |||
| Shear Stress | |||
| Frozen Layer Fraction at End of Fill | |||
| Cooling Time | |||
| Ease of Fill | |||
| Velocity Vectors | |||
| Air Traps | |||
| Sink Marks | |||
| X-Y Plots | |||
| Clamp Force | |||
| Cycle Time | |||
| Dynamics Results Adviser | |||
| Results Adviser Help | |||
| Central Temperature at End of Fill | |||
| Average Temperature at End of Fill | |||
| Shear Rate | |||
| Volumetric Shrinkage | |||
| Temperature at End of Cooling | |||
| Report Generation | |||
| Microsoft® Word | |||
| Microsoft® PowerPoint | |||
| HTML | |||
